Asphalt Calculator
Estimate asphalt volume and tonnes from driveway area, depth, density, and waste
Estimate boards, sheets, concrete, paving, mulch, turf, roofing, plasterboard, bricks, paint, flooring, tiles, decking, fencing, gravel, and roof pitch with metric inputs.
Estimate asphalt volume and tonnes from driveway area, depth, density, and waste
Estimate driveway sealer litres from surface area, coats, coverage, and waste
Calculate baluster count and even spacing for deck railings and stair guards
Estimate mortar volume and bag quantities for block or brick work
Estimate battens, spacing, total board length, and waste for board and batten walls
Calculate board feet from timber thickness, width, length, and quantity
Estimate bricks needed for walls from wall area, brick size, mortar joints, and waste
Calculate carpet to order from UK 4m or 5m roll widths with fitting allowance
Estimate concrete blocks needed for a wall from dimensions, block size, and waste
Calculate concrete volume and 25kg or 40kg bags for slabs, paths, post holes, and footings
Calculate concrete volume for strip footings, trench fill, and foundation runs
Estimate concrete volume for straight concrete steps from rise, tread, width, and step count
Estimate deck boards from deck size, board width, gap, board length, and waste
Calculate decking boards, waste allowance, and linear metres for UK deck projects
Calculate fence panels, posts, post holes, and postcrete bags for UK fencing
Calculate flooring area, waste allowance, packs, and estimated cost in m²
Estimate grass seed quantity from lawn area, sowing rate, reseeding rate, and waste
Calculate gravel, soil, sand, or aggregate volume, tonnes, bulk bags, and small bags
Estimate mulch volume, litres, cubic metres, and bags for garden beds
Estimate sub-base, bedding sand, and compacted base volume for paving
Estimate paving slabs or block pavers from patio area, paver size, and waste
Estimate plasterboard sheets from wall or ceiling area, sheet size, openings, and waste
Estimate plywood sheet quantities from project area, sheet size, and waste allowance
Estimate concrete for fence posts, deck posts, and round post holes
Calculate rafter length from span, rise, pitch angle, and overhang
Estimate reinforcing bar counts and total length for slabs, footings, and grids
Estimate retaining wall blocks, backfill, cap blocks, and waste allowance
Estimate river rock or decorative pebble volume, weight, and bags for landscaping
Calculate sloped roof area from footprint dimensions, pitch, and roof faces
Calculate roof pitch, angle, slope ratio, rafter length, and roof multiplier
Estimate roof covering area, bundles or sheets, underlay, and waste allowance
Estimate sand volume and tonnes for bedding, paving, play areas, and landscaping
Estimate topsoil or compost volume in cubic metres, litres, bags, or bulk bags
Estimate decorative stone, aggregate, or chippings volume and tonnes
Estimate studs, plates, noggins, and timber length for an internal stud wall
Calculate floor or wall tiles, grout gap, waste allowance, and packs needed
Estimate skirting, architrave, trim, or moulding length with waste allowance
Estimate turf rolls needed for a lawn from area, roll coverage, and waste allowance
Directory
Use these links to move quickly between the most useful calculators, topic groups, guides, and official resources for this category.
UK planning and building control guidance for home projects.
Official guidance on when building regulations approval may be needed.